aclam hybrid track l2 – top routing

CLASSIC AND NEW

Aclam’s Hybrid Track® L2 – top routing allows using both attaching methods in one large pedal board. You can use the
Smart Track® method for those mew pedals that haven’t been covered with Velcro®, or the really expensive boutique ones,
and use the Velcro® brand strips if you already have pedals with this polyester stuck on them. A choice for each specific case.
Enjoy the modular features of Aclam’s Smart Track® and Evo Track® fastening methods as well as both attaching approaches,
having it all was never this easy!

CABLE OVERLAY

Aclam’s Hybrid Track® L2 – top routing is only available with the top routing format and will reverse into a
Smart Track® L2 – top routing.
If you are concerned about the cabling mess you should know that you can use the Tidy Cables to keep this large pedal board neat.
Use these polyamide clips to attach and route cables across the track’s grooves, under the pedals and up vertically using the
clamped-clips know as Tidy Cables Duo.
Having this kind of routing configuration will come in handy if there is a signal problem and you must detect where the problem
is rapidly. Lifting and flipping over a large pedal board like the Hybrid Track® L2 – top routing can be tricky, especially if
it’s fully loaded of pedals. With the cables on the top side you can see what is going on without having to do any kind of effort.

ALL THE BITS AND PIECES

Aclam’s Hybrid Track® L2 – top routing pedalboard is a large pedal board that can fit up to 14 pedals and is full of
customization possibilities.
Need a two-teared large pedal board to access the effects pedals more comfortably? Upper and Wahpper are your choices.
Want to get rid of the power supply that is taking space on the top of the board so you can place that new stompbox? Check the
PSU supports available.