PARTIALLY RISEN PEDALBOARD
With the Aclam Wahpper pedalboard partial riser you will elevate a section of your board, leaving enough flat space to place those
pedals that need the whole depth of the pedalboard.
The Wahpper can be found in two sizes and has a different conceptual approach than the Upper. While the Upper elevates the whole
existent track of your double-tracked pedalboard, the Wahpper includes a track in the chosen size that will attach over the
existing with the special side guides at an elevation of 4,5cm, leaving a 2,6cm gap between top and bottom track.
Assemble the track to the special side guides included in the Wahpper and place it along the pedalboard using the grooves.
Once at the desired position, use the thumb-screws to fasten the pedalboard partial riser to the board.
As it happens with other Aclam accessories, the Wahpper has additional features apart from the one it was designed for.
Even having an insufficient gap to place effect pedals between tracks, you can use that space for cable routing
together with a choice of Tidy Cables.
Sometimes, you may have a sequence of pedals set up to be activated by a switcher, so there is no need for them to be accessible.
Take advantage of the Upper risers which can elevate 2,7cm the Wahpper by stacking as many as needed to have enough gap to place those effects pedals you don’t need to manually activate.
Wahpper is compatible with L2 and S2 sizes. For L2 pedalboards you have two length options, 42cm or 59cm, depending on which
you choose you will be left with a non-risen space of 41cm or 24cm wide. In the case of S2 pedalboards you would only have
the 42cm option, leaving a 17cm wide flat section on your pedalboard.
Wahpper is not compatible with XS2 pedalboards nor Free Routing options.
There are no reviews yet.