cioks stack flex – type 1 or 4 | to sum the voltages of 2 outlets and power a pedal

By using two isolated outlets on your Cioks, the Stack Flex gives you the sum of voltages of the two outlets used.

Stack Flex type 1 is fitted with a black 5,5/2,1mm centre negative DC plug. Also called the BOSS standard at the pedal end.

Type 4 is with a green 5,5/2,5mm centre positive DC plug and mainly seen on older EHX pedals for 24V or 40V.

If your power supply doesn’t have a dedicated 18V outlet you can use type 1 Stack Flex. You can power an 18V pedal using two isolated 9V outlets.

If you have one of the older EHX pedals that need 24V you can use the type 4 Stack Flex with the green DC plug. To get 24V use two isolated outlets in 12V setting.

To power one of the three 40V EHX pedals you should use the 18/24 outlet on the CIOKOLATE in 24V setting and the adjustable 4-15V outlet 1 in max. setting at 15V.

The pedal will get 39V which is pretty close to the 40V.

Please note that the Stack Flex makes a series connection of the two outlets used. These two outlets must be isolated from each other.

You get the sum of voltages (V) and not the current (mA). If you use it with two 9V outlets with a 100mA rating each you’ll get 18V and still a max. current of 100mA.

BE CAREFUL when using Stack Flex. There is a risk of damaging one of your 9V pedals by powering it with too high a voltage.

Check the specifications of the pedal. If you still have some questions, you’re welcome to send an e-mail to [email protected] and get some useful information.