rental tools for effect pedals and diy cables | full set

39,90 238,90 

With this rental set, you have everything you need to assemble your pedal kit and your cable jacks, comfortably at home, or during one of our online masterclasses to be supervised!
We use the same pack for our masterclasses and our prototyping laboratory!

Rental of the pack is 39.90€. You will also be asked for a deposit of 199€
which will be refund when you will return the pack.

  

rental tools to assemble your kits and jack cables!

In this set you’ll find tools to build most of our effect pedal projects,
and start your DIYer trip in the best way!
You also have all the necessary tools to assemble all the cables you need on your pedalboard.

This is a rental set for online masterclasses, or to assemble your kits and cables at home with the appropriate tools.
If you are not equipped and don’t want to invest in tools or a tool set, we will send this to you so you can assemble
your cables and pedals in the best conditions!

If you don’t plan to make both pedals and cables, you can check out the other packs.
There’s this one for cables only, and this one for pedal kits.
You can find back our selections in this blog article.

how does the rental work?

Rental of the pack is 39.90€. You will also ask for a deposit of 199€
which will be refund to you when you will return the pack.

For the deposit, you have 2 options:
Either you only pay the rental on the website, and send us the 199€ deposit by cheque to the following address:
ANASOUNDS 241 bis boulevard de la Madeleine, 06000 Nice, France. We will refund you when the pack is returned.
Or you can pay the rental + the deposit directly on the website, and we will make a transfer of 199€ when you return the pack to us.

The rental lasts 3 weeks, enough to assemble a pedal and a few cables!

package content

A soldering iron from the Japanese brand Goot. 30W. Fully dismountable, revisable and guaranteed by our supplier.
Works really well with lead free soldering and soldering iron tips age well too.
The limit to this product is that heating time is quite long compared to a professional station.
However, you can believe we chosed its quality!
It is much better than those horrible soldering irons that heat up the whole room and that you find back 5 minutes later with carbonized iron tip.

Flat tip for your CXR41 solder iron because we consider that this is essential!

Leadfree tin, 50g, Sn99.3 Cu0.7 1mm wide.
Tested and approved for a good result without hassle.

A universal soldering iron stand. This is essential if you want to avoid burning yourself.

A brass tip cleaner, to keep the tip always clean.

Tip renovator, to get a clean tip and save it for a longer time!

Desoldering wick, works perfectly to remove any mistakes!

Rotative PCB holder to solder in confort, with good vibes and without mistakes!

 3rd hand with its magnifying glass, it helps to prepare jacks, wires and also the magnifier helps our good old friends!

Professional cutting plier. Nothing special except it does its job perfectly and that we use it every days!

Nose plier with a 45° angle. Very good to catch your wires and install them everywhere.

Flat-head screwdriver. Basically a screwdriver. I guess you must have 10 or 12 at home but they get lost as easily as picks!

Phillips screwdriver PHOO. Did you know that the actual name is Philips and not cross-headed?

Wrench to assemble everything with your pedal!

FX Teacher methodology tester to fully enjoy the FX Teacher experience!

A multimeter, to check the voltages.

1 Spot with EU plug, to power your pedal and your FX Teacher tester.

Multifunction wire strip plier, useful tool to prepare your wires…

Solid cutting pliers, to cut the big cable of your DIY jack patches, or your guitar strings!

PH2 screwdriver, for pancake jack connectors, and many other things

Scalpel, also useful for DIY jacks!

A cable tester, it allows you to be sure that the cable conducts the signal correctly, and above all that
there are no micro-cuts, something you won’t see with a multimeter!

origins of these products

Tools are obviously  made in Asian country, but it is made on the right way.
Our importer is in France and he will do the after-sales service for us, which shows their commitment about the quality of their tools.

We chose their kit because it contains Goot CXR41 30W soldering iron that our team tried and compared to a dozen of different ones. And was the best at the end.
It also comes with quality accessories to help you realize our kits worry-free!

The whole package is packed in a very convenient transport case.
Enough to easily join our masterclasses or create your pedals in the living room with the homies!

Weight 0,01 kg
Dimensions 40 × 30 × 27 cm
caution

by cheque only, rental + deposit included in payment

There are no reviews yet.

Add a review

Be the first to review “rental tools for effect pedals and diy cables | full set”

Your email address will not be published.

SKU: 3760257571834 Categories: , , , Tags: ,
Updating…
  • No products in the cart.